Crankshaft Removal Tip

11 Flares 11 Flares ×
Crankshaft Removal Tip

crankshaft-removal
If you plan on removing your crankshaft while leaving the rod and piston assemblies in the bores, attach a rubber band to a bolt on each rod and to a reinstalled oil pan bolt. This will keep the rods off to the side and from banging into the block when pulling the crank out.

Print Friendly, PDF & Email

Speak Your Mind

*

11 Flares Facebook 4 Google+ 1 Pin It Share 0 Twitter 6 StumbleUpon 0 11 Flares ×